Aftershave energizing gel

A DIY recipe for men who love to take care of themselves! This aftershave gel contains caffeine to energize your skin and bisabolol to soothe post-shave irritation. Plus, its mint scent will add a touch of sweetness to the most challenging days!

Preparation

Heat Phase A (water + caffeine + coco silicone + witch hazel hydrosol + bisabolol) in a double boiler or on an electric hot plate until the caffeine is completely dissolved.

Simultaneously, in another pot, heat the xanthan gum with glycerin, trying to mix them together as much as possible.

Add peppermint essential oil to Phase A, mixing well.

Add Phase B (dissolved in Phase A) while mixing well until Phase B is completely soluble (we recommend using a hand blender; it is possible that some lumps may form, but with some energy and patience, they will disappear).

Let it rest for about 10 minutes to allow the gel to form.

Add the preservative and mix vigorously again to obtain a smooth and homogeneous gel.

Note: The pH of the preparation is approximately 6.5-7.

Measure the pH using a pH meter or pH test strips. If the pH is not between 6.5 and 7, adjust it as follows:

If the pH is lower than 6.5, adjust it with a 30% caustic soda solution. Add it drop by drop.

If the pH is higher than 7, adjust it with lactic acid or citric acid. Again, add it drop by drop.

How to use

After shaving and thoroughly cleaning your face from foam and hair, apply it with circular movements. It doesn't stick!